Medi 3 C

medi 3C - 3-Point Hyperextension Brace with Ratchet-Closer

Product Overview

The medi 3C is a hyperextension brace designed to stabilize and extend the thoracolumbar spine. It provides support for patients recovering from vertebral fractures, post-surgical care, and conditions that require controlled hyperextension. The brace features an easy-to-use ratchet-closer system, nickel-free, skin-friendly materials, and adaptive movement support for enhanced comfort and functionality.

Key Features

• Ratchet-Closer System – Allows for easy handling and secure fastening.
• Skin-Friendly & Nickel-Free – Designed for long-term wear without irritation.
• Adapts to Body Movements – Provides dynamic support without restricting mobility.
• Spinal Extension Support – Helps stabilize and extend the thoracolumbar junction.

Material Composition

• Structural Components: Aluminum, Polyethylene
• Padding & Comfort: Cotton

Intended Use

The medi 3C hyperextension brace is used to support the lumbar and thoracic spine by maintaining spinal extension and reducing pressure on affected areas. It is intended for orthotic fitting and should only be worn on intact skin.

Indications (Recommended For)

• Stable Compression Fractures of the middle and lower thoracic and lumbar vertebrae
• Conservative Treatment of Inoperable Vertebral Body Fractures in the thoracic and lumbar spine
• Hyperkyphosis in Scheuermann’s Disease – Excessive forward curvature of the spine
• Temporary Post-Operative Orthotic Care – Stabilization after surgery

Contraindications (Not Recommended For)

• Unstable Fractures of the Thoracic/Lumbar Spine – With or without neurological deficits

Fitting Instructions

1. Select the Correct Size

   • Choose the appropriate model based on waist circumference.
   • Measure the sternal rod length from the top of the pubic crest to the lower edge of the sternoclavicular joints.

2. Adjust the Brace

   • Loosen the screws on the base plate to modify the length.
   • Fully extend the sternal pad and adjust the brace so the waistband sits above the iliac crest.
   • Adjust the symphysis and sternal rods to suit the patient's body structure.
   • Secure the dorsal pad and fit the waistband.

3. Shape the Brace for a Custom Fit

   • The sternal rod and lateral extensions can be shaped by hand by bending them over a knee or chair back.
   • Do not bend the sternal rod within the range of motion of the sternal pad.
   • If needed, use round bending irons for precise adjustments.
   • Before bending, remove the sternal pad for safety.

4. Secure the Sternal Pad

   • Slide the sleeve nut into position and fasten with screws.
   • Secure the screws with Loctite to prevent loosening.

5. Verify Pad Placement

   • The sternal pad’s upper edge should align with the lower edge of the sternoclavicular joints in hyperextended position.
   • The symphysis pad’s lower edge should be level with the pelvic crest.
   • Bend the lower part of the symphysis pad outward for comfort.
   • Ensure all screws are securely tightened.

6. Final Adjustments & Safety Check

   • Check the brace function the day after fitting and adjust if necessary.

Using the Ratchet Fastener System

• Opening & Closing:

  • Do not open the fastener covers beyond 180°.
  • Fold the covers back and thread the belt through the fasteners until the belt tips are visible at the front.
  • Tighten the belt by opening and closing the fastener covers, adjusting until the desired hyperextension is achieved.
  • Both fastener covers must be closed to secure the brace.
  • Trim excess belt length with scissors if needed.

• Removing the Brace:

  • Open one fastener cover completely using the thumb.
  • Pull the belt out for easy removal.

Caution & Safety Guidelines

• Do not force the fastener closed or tighten beyond the pain threshold.
• Ensure normal breathing is possible at all times while wearing the brace.

Available Specifications

• Standard Color: Silver
• Adjustable Fit: Customizable components for individualized support